Contact us at (254)-221-7438


How To Clean Toilet Bowl Ring Without Scrubbing

How To Clean Toilet Bowl Ring

How To Clean Toilet Bowl Ring In Less Than 20 Minutes

Have you had problems with rust stains in your toilet? Well, so have we and we’ve wasted a ton of money trying a number of commercial cleaning products to no avail.

In this article, we’re going to teach you how to get rid of toilet rust stains in 20 minutes or less without the need for any scrubbing.

That’s a tall order we know so let’s get started removing those unsightly mineral and limescale deposits from your toilet bowl.

Supplies Needed To Complete The Task

how to remove toilet bowl rust stains

  • Iron Out Toilet Bowl Cleaner (It removes rust and hard water stains) -Amazon ($12.97) in a 4-pound, 12-ounce size
  • Rubber gloves
  • 5 Gallon Bucket – (used for hot water, the hotter the better)
  • Plunger
  • Old rag or towel
  • Drain stopper
  • Measuring cup

Step 1 – Remove the toilet tank’s lid and carefully set it aside.

Step 2 – Turn the main water supply off at the back of the toilet.

Step 3 – Flush the toilet. You want to make sure the toilet’s bowl is completely empty.

Step 4 – Use the plunger to push the water that remains through the P-trap.

Step 5 – When you’ve got most of the water out of the bowl take the old towel and plug up the P-trap.

Step 6 – Place the drain stopper over the top of the towel to further seal off the hole that leads to the P-trap.

Step 7 – Fill your 5-gallon bucket with hot water. We like our water’s temperature to be at least 120 degrees Fahrenheit.

Step 8 – Pour the hot water into the bowl. Make sure your water rises to a level high enough so that it gets rid of all the ugly rust stains as well as clean the toilet jets. Pour the remaining water from your bucket into the tank.

Step 9 – Pour 1/2 cup of Iron Out toilet bowl powder into the toilet bowl.

Step 10 – Place a 1/4 cup of Iron Out in the toilet’s tank.

Step 11 – Turn on an exhaust fan or open a window and set the timer on your watch for 20 minutes. Leave the bathroom.

Step 12 – Return to the bathroom after 20 minutes and put on your rubber gloves.

Step 13 – Remove the towel and drain stopper and allow the water in the bowl to drain.

Step 14 – Turn the water back on and flush the toilet. Replace the tank’s lid and enjoy your sparkling white toilet bowl minus the ugly rust stains.

This is an easy way to clean ugly toilet bowl stains and wash them down the drain.

Other articles that you might enjoy on cleaning toilets:

 

Other Posts You Might Enjoy

How To Remove A Toilet Seat With Rusted Bolts With... How To Remove A Toilet Seat With Rusted Bolts Replacing a toilet seat is typically a very easy do it yourself project. Normally, all you would need t...
How Much Does A Plumbing Snake Cost? How Much Does A Plumbing Snake Cost? If you're looking for a fast way to unclog a sink whether its a kitchen sink or bathroom sink you're going t...
How To Stop a Running Toilet How To Stop a Running Toilet DIY Guide Running toilets are a pain in the butt. Today I'm going to share with you how to stop a running toilet. I'm sp...
Gleen Green Cleaning Cloth – Cleans Any Surf... A Fast and Easy Way To Clean How would you like to be able to clean your glass, stainless steel without using any chemicals at all? Well, now yo...

Comments are closed.

Paste your AdWords Remarketing code here